Straight Razor Place Forums - View Single Post

Buddel · 07-09-2008, 08:12 AM

This wood is very special. Unfortunately i dont know, what it is. If some one can help me with this information, it would be great.
The wood has an wonderfull grain but isn´t very hard. Some parts really soft, others a little bit harder. It is very light and break very easy. So I must use first time a brass liner. Several coats of CA protect the wood against water and give them additional stability. The blade is a Wade & Butcher 6/8 hollow ground. The spacer is from brass and vulcanfibre.

07-09-2008, 08:12 AM	#1 (permalink)
Buddel Status: Senior Member Join Date: May 2007 Location: Germany Posts: 221 Thanks: 8 Thanked 26 Times in 18 Posts	Wade & Butcher with an unknown wood This wood is very special. Unfortunately i dont know, what it is. If some one can help me with this information, it would be great. The wood has an wonderfull grain but isn´t very hard. Some parts really soft, others a little bit harder. It is very light and break very easy. So I must use first time a brass liner. Several coats of CA protect the wood against water and give them additional stability. The blade is a Wade & Butcher 6/8 hollow ground. The spacer is from brass and vulcanfibre. Attached Images __________________ www.fine-razors.de