Straight Razor Place Forums - View Single Post

L R Harner · 07-26-2008, 02:23 PM

you could most likely make that work after a few mess ups

i would be looking for a epoxy thats not bondo fiberglass for this tho as you get just 12 min to work with it (might suprize you how fast that goes when doing layers.

you ll also need at the least some plastic wrap and 2 good thick boards and a few C clamps

this is fun stuff to play with

07-26-2008, 02:23 PM	#7 (permalink)
L R Harner Status: Senior Member Join Date: Jan 2008 Posts: 196 Thanks: 5 Thanked 17 Times in 15 Posts	you could most likely make that work after a few mess ups i would be looking for a epoxy thats not bondo fiberglass for this tho as you get just 12 min to work with it (might suprize you how fast that goes when doing layers. you ll also need at the least some plastic wrap and 2 good thick boards and a few C clamps this is fun stuff to play with __________________ Lloyd Richard Harner III most people that know me just call me Butch L.R.Harner Knives If you're not going to do it right, don't do it. www.harnerknives.com (is work in progress)