[JoshEarl]

I realized that a couple of threads had gotten hijacked with some advanced metallurgical discussion, so I thought I'd start a new thread so we can continue this important conversation.

Twalsh, I think your understanding of bainite vs. martensite is off base. I don't have my reference texts in front of me right now, but maybe I can post some passages later.

Both martensite and bainite are end products of quenched austenite. They do not transform into one another.

Let's take 1080 steel as a simple example. If you look at the TTT diagram for 1080, it shows that you will get 100 percent martensite in a piece of steel if you quench the steel from 1450 F or so to under 800 F in about 1 second. Then you have some more time (somewhere between 10 and 60 seconds, I forget exactly) to cool the blade to the Ms point, which is about 425 F.

Once you hit Ms, you will have martensite in the finished blade. Period. That martensite will not become bainite unless you heat the steel all the way to critical and begin the process over again. Tempering does not produce bainite.

So, back to our 1080. Once you get below a certain temperature, let's say 600 F, you have a choice. You can continue to cool the blade at a normal rate and produce 100 percent martensite, or you can halt the cooling and hold the blade at a temperature of around 500 or so degrees. If you do that for enough time, you'll create bainite. This process is called austempering.

Depending on how you handle the blade between the Bs and Ms points, you could end up with a mixed bainite/martensite structure in the finished blade.

Tempering a martensite blade results in tempered martensite, not bainite. I think your confusion might be arising from the similarity between the temperatures used in tempering martensite (350 to 500 F, roughly) and the temperature where bainite can form on cooling.

Mike, correct me if I'm oversimplifying or off base.

Josh

[Russel Baldridge]

Ooh, good info!

That is my understanding of the matter as well, if that means anything.

[Mike Blue]

Josh, you're doing fine. I think it would be best to try to keep this as simple as possible for a couple good reasons. First, plain English is easier to understand and second, understanding this subject is the most important thing to offer both the heat treater and the customer. It'll keep us all honest and the hype to a minimum.

Once some time has passed, it'll turn into shorthand as more people become comfortable with the concepts. Then it'll seem esoteric to someone who doesn't know. Eventually you could even make this a sticky or FAQ or tutorial somewhere.

[JoshEarl]

Maybe I'll try to put together a Heat-Treating 101 tutorial. There are lots of places on the 'Net with that kind of information, but having some reference material here on SRP would be nice.

Josh

[tjiscooler]

Originally Posted by JoshEarl

Maybe I'll try to put together a Heat-Treating 101 tutorial. There are lots of places on the 'Net with that kind of information, but having some reference material here on SRP would be nice.

Josh

+1 on that! I have always been interesting in making my own knives and razors, but have trouble finding the basics, not to mention the having no money thing.....

[mastermute]

I found this link while roaming the net for some info on metalurgy:http://www.feine-klingen.de/PDFs/verhoeven.pdf

[Mike Blue]

Originally Posted by mastermute

I found this link while roaming the net for some info on metalurgy:http://www.feine-klingen.de/PDFs/verhoeven.pdf

While I have to admit that you've stumbled on a diamond hiding on the net, ASM sells a hardcopy of John's book that I would recommend strongly for anyone who plans to work with steel in blade form, especially the heat treatment thereof. There are some things in the hardcopy that do not appear in the .pdf

[str8razor]

Great thread Josh keep it up. I am learning more and more.

[mastermute]

Originally Posted by Mike Blue

While I have to admit that you've stumbled on a diamond hiding on the net, ASM sells a hardcopy of John's book that I would recommend strongly for anyone who plans to work with steel in blade form, especially the heat treatment thereof. There are some things in the hardcopy that do not appear in the .pdf

I didn't know there was a hardcopy I was searching for info on AEB-L and this popped up.

What is "ASM"? I'd like to have a look for the hardcopy...

[Mike Blue]

ASM > MyASM

That's the general site.

Here's the link to Dr. V's book.

ASM > Details

[str8razor]

This book is also available on Amazon.com for $78.70 and free shipping......see below link:

Amazon.com: Steel Metallurgy for the Non-Metallurgist: John D. Verhoeven: Books