[Chris L]

I lucked out in getting a Hand American order of 3 horse butt strips. I was able to cut out 5 total 2 1/2" x 24" strips. I also received three strop hanging clips from Hand American. If my prototype that I've finished and that I'm using works well for me, then I would make the other strops and sell them at a low cost to members as a one time thing.

Is there a known source for the hangers? I prefer the old school barber style strops with no handle hardware so I'm only looking for hanging hardware.

In doing a search of the forums, I see using a D ring and clip. Any alternate ideas? Thanks.

Chris L

[gssixgun]

Chris I found this stuff at the Saddle & Tack shop at the local CO_OP hope this helps

My Own Strop !!!!!

[Chris L]

Thanks for the info, Glen. I can't tell from the picture, but how to you get the clip to go around the continuous D ring?

Chris L

[gssixgun]

Originally Posted by Chrisl

Thanks for the info, Glen. I can't tell from the picture, but how to you get the clip to go around the continuous D ring?

Chris L

I drilled out the 3 holes in each side (no leather punch) then looped it over the D ring and used the Chicago fasteners..... Quick and simple enough for me to do it even

[honedright]

Fromm International sells the traditional style brass swivels that they use on their Illinois Razor Strop Company strops.



Scott